Update MEDIUM production

A problem we saw was that thee elastics, when applied, go around the bended edge so if the toolbox stands on the ground, the elastics can get damaged.

So we made the edges shorter so the elastics can pass by easily.

A next problem was the sharp edge in- en outside the hole in the metal that could damage the elastics.

So we added eyelets that fits in the holes of the panel, but have a bigger outer diameter that the diameter of the ronded shape of the corner.

Consult 16/05 Material MASS production

- Buy the ball --> can be very cheap, negotiation with companies for like the half of the price

- Compare PP, PC and ABS. Make the decision of making a quality product or a cheap one --> ALEX

- Compare the price of massproduction for injection molding and sheetmetal --> ALEX
-  Lasercut --> not the fablab! Use a professional company

DIY prototype: a picture manual

Medium production update

Flat and round part if the user wants to use flat and/or rond elastics.

Bended edges for reinforcing the panel

Hole are just cutted out. To cover the sharp edges, we will put some 12 mm eyelets in it.

Consult 9/05

Davy:

- Test how many plates you use with the tools you want to take with you

--> See if it is necessary to add a second handle or to look for a realy cheap solution for it

- Diy transport is not necessary

- How many of the attaching pieces and elastics you give to the user? --> TEST IT!!

- Cost calculation

- We are on track (y)

Jan:

- Mass production --> cents are important

planning

DIY context modified

Toolbox panel with holes for snap connectors.

 Ribs for the panels with the snap connectors.

All the pieces organized in the same plate of ABS of 3 mm of thickness. 

Flexible silicone tube for greater comfort for the handle.